AD-30 Multi-Hold Adapter
This unit was designed for today’s demands and looking to the future. The default setup for the AD-30 is the “Tone Hold” mode; this mode lets the unit work with virtually any Analog phone set on the market. It also works with the "Hold" button on the RCA 2540x, 2541x, or 2542x phones, or with one of our Sensor Boards to work with specific families of phones.
Get the ManualAD-30-A1 Sensor Board
This is an add-on Sensor Board designed to plut into an AD-30 Multi-Hold unit. This sensor board attaches to one of the AT&T 1040, 1070, or 1080 phones. You can mix and match any combination of these three phones, up to 12 phones total. The unit will work flawlessly to provide seamless music/promotion on hold using just the HOLD button.
Get the ManualAD-30-A2 Sensor Board
This is an add-on Sensor Board designed to plut into an AD-30 Multi-Hold unit. This sensor board attaches to one of the AT&T SB67118, SB67138, or SB67158 phones. You can only have ONE of these three Panasonic phones at a site but, you can have up to 10 handsets (SB67108 or SB67148) linked to that phone. The unit will work flawlessly to provide seamless music/promotion on hold using just the HOLD button.
Get the ManualAD-30-P1 Sensor Board
This is an add-on Sensor Board designed to plut into an AD-30 Multi-Hold unit. This sensor board attaches to one of the Panasonic KX-TG4000 or KX-TG4500 phones. You can only have ONE of these Panasonic phones at a site but, you can have up to 8 handsets linked to that phone. The unit will work flawlessly to provide seamless music/promotion on hold using just the HOLD button.
Get the ManualAD-30-P2 Sensor Board
This is an add-on Sensor Board designed to plut into an AD-30 Multi-Hold unit. This sensor board attaches to one of the Panasonic KX-TS4100, KX-TS4200, or KX-TS4300 phones. You can only have ONE of these Panasonic phones at a site but, you can have up to 8 handsets linked to that phone. The unit will work flawlessly to provide seamless music/promotion on hold using just the HOLD button.
Get the ManualAD-30-P3 Sensor Board
This is an add-on Sensor Board designed to plut into an AD-30 Multi-Hold unit. This sensor board attaches to the Panasonic KX-TG9541 phone. You can only have ONE of these Panasonic phones at a site but, you can have up to 8 handsets linked to that phone. The unit will work flawlessly to provide seamless music/promotion on hold using just the HOLD button.
Get the ManualAD-30-P4 Sensor Board
This is an add-on Sensor Board designed to plut into an AD-30 Multi-Hold unit. This sensor board attaches to the Panasonic KX-TG9471 phone. You can only have ONE of these Panasonic phones at a site but, you can have up to 8 handsets linked to that phone. The unit will work flawlessly to provide seamless music/promotion on hold using just the HOLD button.
Get the ManualAD-31
This is a High Quality Promotion On Hold Repeater. It plays through your list of MP3s stored on the USB plugged into the unit. After power loss and return it automatically starts playing your messages again. We provide the AD-31 MP3 Manager program with eight COPYRIGHT Free Promotion On Hold tracks to get started. The AD-31 has an 8 ohm, 200mW, RCA, adjustable output for all your needs. The AD-31 also has a built-in test speaker, so you can easily make sure your message is playing.
Get the Manual
AD-31 MP3 Manager, V1.00
Posted: 06-14-2024 - Size: 27.7M